KM-615
Thick Table Clamp + Max Arm AAC Switch & Camera Holder
Specification
WORLDWIDE
Products
Home > Products > Thick Table Clamp Mounting Kits > Camera Holders
Camera Holders
- For mounting equipment that has 1/4"-20 male or female thread
The Max Arm has two 5/8" (16mm) hex shaped studs: a 3/8"-16 female thread and a 1/4"-20 female thread. This set includes an adapter spigot (KS-054) that helps convert the female threads on either end to 3/8"-16 or 1/4"-20 male thread. The adapters can mount most cameras & camcorders, AbleNet switches with universal mounting plates, or any other equipment that comes with a 1/4" and 3/8" male or female thread. The Max Arm allows you to easily adjust the position and angle of your mounted devices with ball jointed studs that rotate 360 degrees, and a cut-out in the sleeve surrounding the ball allows the stud to be bent 90 degrees. One stud is tapped to receive a 3/8"-16 thread while the other is tapped to receive a 1/4"-20 thread. The central elbow rotates 360 degrees for infinite adjustability and is equipped with user-replaceable special friction discs with anti-slip rosettes to prevent unwanted movement. The large rubberized hand wheel slowly increases tension until all three joints lock simultaneously, making precise positioning a breeze. The other end of the arm has a ball head with a hex stud that connects to the Thick Table Clamp. The Clamp can be securely mounted onto tables up to 4" (10 cm) thick and provides excellent stability as a base. The user-friendly Clamp is easily secured and removed efficiently. This set mounts a camera, camcorder, AbleNet switch, or any equipment with a 1/4"-20 or 3/8"-16 male or female thread within a flexible 20" (53 cm) radius of a thick table.
Note: For mounting on tables thicker than 4" (10 cm), please check out the two other clamps we offer in the "Components and Accessories" section: KMB-601 (for table thickness < 9" or 24 cm) and KMB-601-L (for table thickness < 17" or 44 cm).
Note: For mounting on tables thicker than 4" (10 cm), please check out the two other clamps we offer in the "Components and Accessories" section: KMB-601 (for table thickness < 9" or 24 cm) and KMB-601-L (for table thickness < 17" or 44 cm).
